<?xml version="1.0"?>
<gconf>
<dir name="schemas">
<dir name="desktop">
<dir name="gnome">
<dir name="typing_break">
<entry name="enabled">
<local_schema short_desc="是否鎖定鍵盤">
<longdesc>是否鎖定鍵盤</longdesc>
</local_schema>
</entry>
<entry name="allow_postpone">
<local_schema short_desc="允許暫時放棄休息">
<longdesc>可否暫時延後進入休息畫面的時間。</longdesc>
</local_schema>
</entry>
<entry name="break_time">
<local_schema short_desc="休息時間">
<longdesc>工作時間中必須間歇性地休息指定的時間，以分鐘計算</longdesc>
</local_schema>
</entry>
<entry name="type_time">
<local_schema short_desc="工作時間">
<longdesc>開始休息時間之前可以工作（打字）的時間，以分鐘計算</longdesc>
</local_schema>
</entry>
</dir>
<dir name="thumbnailers">
<entry name="disable_all">
<local_schema short_desc="停止使用任何製作縮圖的程式">
<longdesc>如設定為“true”，會停止產生任何縮圖，而不理會各種製作縮圖的程式是否已經個別被啟用或者停止使用</longdesc>
</local_schema>
</entry>
</dir>
<dir name="sound">
<entry name="event_sounds">
<local_schema short_desc="代表事件的音效">
<longdesc>當出現不同事件時播放代表該事件的音效。</longdesc>
</local_schema>
</entry>
<entry name="enable_esd">
<local_schema short_desc="啟用 ESD">
<longdesc>啟動時開啟音效伺服程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="peripherals">
<dir name="mouse">
<entry name="cursor_size">
<local_schema short_desc="鼠標大小">
<longdesc>cursor_theme 中指定的鼠標主題的大小。</longdesc>
</local_schema>
</entry>
<entry name="cursor_theme">
<local_schema short_desc="鼠標主題">
<longdesc>這個是鼠標主題名稱，只適用於支援 Xcursor 的 X 伺服程式，例如 XFree86 4.3 或以後的版本。</longdesc>
</local_schema>
</entry>
<entry name="cursor_font">
<local_schema short_desc="鼠標字型檔">
<longdesc>載有鼠標的檔案名稱。如果沒有設定，會使用預設的鼠標檔。本設定值只會在作業階段開始時傳送至 X 伺服程式，因此使用 X Window 時更改設定是不會生效的，必須登出再登入後才會生效。</longdesc>
</local_schema>
</entry>
<entry name="locate_pointer">
<local_schema short_desc="標示鼠標位置">
<longdesc>當按下及放開 Control 鍵後，加強顯示目前鼠標的位置</longdesc>
</local_schema>
</entry>
<entry name="double_click">
<local_schema short_desc="滑鼠連按時間">
<longdesc>分辨滑鼠連按兩下及分別按兩下的時限</longdesc>
</local_schema>
</entry>
<entry name="drag_threshold">
<local_schema short_desc="拖曳距離界限">
<longdesc>滑鼠移動指定的距離才會作為拖曳計算</longdesc>
</local_schema>
</entry>
<entry name="motion_threshold">
<local_schema short_desc="移動距離界限">
<longdesc>鼠標加速前所需的移動距離（像素）。-1 表示使用系統預設值。</longdesc>
</local_schema>
</entry>
<entry name="motion_acceleration">
<local_schema short_desc="點擊滑鼠按鈕">
<longdesc>滑鼠移動的加速度。-1 表示使用系統的預設值。</longdesc>
</local_schema>
</entry>
<entry name="single_click">
<local_schema short_desc="點擊滑鼠按鈕">
<longdesc>只點擊一下滑鼠按鈕就可以開啟圖示</longdesc>
</local_schema>
</entry>
<entry name="left_handed">
<local_schema short_desc="左右手滑鼠模式">
<longdesc>在左手滑鼠模式中，左右按鈕的功能會互換</longdesc>
</local_schema>
</entry>
</dir>
<dir name="keyboard">
<entry name="remember_numlock_state">
<local_schema short_desc="記憶 NumLock 狀態">
<longdesc>如設定為“true”，GNOME 會在下次進入桌面時回復上次的 NumLock 鍵狀態。</longdesc>
</local_schema>
</entry>
<entry name="bell_custom_file">
<local_schema short_desc="鍵盤響聲音效檔">
<longdesc>應播放的響聲音效檔名稱</longdesc>
</local_schema>
</entry>
<entry name="bell_mode">
<local_schema>
<longdesc>可使用的值為“on”、“off”及“custom”。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="lockdown">
<entry name="disable_print_setup">
<local_schema short_desc="禁止更改列印設定">
<longdesc>禁止用戶修改列印設定。譬如說，本設定會令所有應用軟體的「列印設定」對話方塊失效。</longdesc>
</local_schema>
</entry>
<entry name="disable_printing">
<local_schema short_desc="禁止列印">
<longdesc>禁止用戶列印。譬如說，本設定會令所有應用軟體的「列印」對話方塊失效。</longdesc>
</local_schema>
</entry>
<entry name="disable_save_to_disk">
<local_schema short_desc="禁止將檔案儲存至磁碟">
<longdesc>禁止用戶將檔案儲存進磁碟。譬如說，本設定會令所有應用軟體的「另存新檔」對話方塊失效。</longdesc>
</local_schema>
</entry>
<entry name="disable_command_line">
<local_schema short_desc="禁止使用指令列">
<longdesc>禁止用戶使用虛擬終端機或者從指令列執行指令。譬如說，本設定會令面板中的「執行程式」對話方塊失效。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="interface">
<entry name="show_unicode_menu">
<local_schema short_desc="顯示「統一碼控制字元」選單">
<longdesc>文字輸入欄和文字顯示元件中的選單應否顯示統一碼控制字元的選擇</longdesc>
</local_schema>
</entry>
<entry name="show_input_method_menu">
<local_schema short_desc="顯示「輸入法」選單">
<longdesc>文字輸入欄和文字顯示元件中的選單應否顯示輸入法選擇</longdesc>
</local_schema>
</entry>
<entry name="menubar_accel">
<local_schema short_desc="選單列捷徑鍵">
<longdesc>用來開啟選單列的鍵盤快捷鍵。</longdesc>
</local_schema>
</entry>
<entry name="file_chooser_backend">
<local_schema short_desc="GtkFileChooser 所使用的模組">
<longdesc>GtkFileChooser 元件所使用的模組，不同模組會以不同的方式顯示檔案系統。可能的值為“gnome-vfs”或者“gtk+”。</longdesc>
</local_schema>
</entry>
<entry name="status_bar_meter_on_right">
<local_schema short_desc="狀態列在右邊">
<longdesc>進度列是否在右邊顯示</longdesc>
</local_schema>
</entry>
<entry name="use_custom_font">
<local_schema short_desc="使用自選字型">
<longdesc>gtk+ 程式會否使用自選字型。</longdesc>
</local_schema>
</entry>
<entry name="monospace_font_name">
<local_schema short_desc="固定寬度字型">
<longdesc>在例如終端機等地方使用的固定寬度字型</longdesc>
</local_schema>
</entry>
<entry name="document_font_name">
<local_schema short_desc="文件字型">
<longdesc>閱讀文件的預設字型名稱。</longdesc>
</local_schema>
</entry>
<entry name="gtk-im-status-style">
<local_schema short_desc="GTK 輸入法狀態樣式">
<longdesc>GTK+ 輸入法所使用的「狀態區域」樣式的名稱。</longdesc>
</local_schema>
</entry>
<entry name="gtk-im-preedit-style">
<local_schema short_desc="GTK 輸入法 Preedit 區域樣式">
<longdesc>GTK+ 輸入法所使用的 Preedit 區域樣式的名稱。</longdesc>
</local_schema>
</entry>
<entry name="font_name">
<local_schema short_desc="預設字型">
<longdesc>gtk+ 選用的預設字型名稱。</longdesc>
</local_schema>
</entry>
<entry name="gtk_key_theme">
<local_schema short_desc="Gtk+ 佈景主題">
<longdesc>gtk+ 預設使用的佈景主題的名稱。</longdesc>
</local_schema>
</entry>
<entry name="gtk_theme">
<local_schema short_desc="Gtk+ 佈景主題">
<longdesc>gtk+ 預設使用的佈景主題的名稱。</longdesc>
</local_schema>
</entry>
<entry name="icon_theme">
<local_schema short_desc="圖示佈景主題">
<longdesc>在面板、nautilus 等等中使用的圖示主題</longdesc>
</local_schema>
</entry>
<entry name="cursor_blink_time">
<local_schema short_desc="游標閃爍周期">
<longdesc>游標閃爍的周期，以毫秒計算</longdesc>
</local_schema>
</entry>
<entry name="cursor_blink">
<local_schema short_desc="游標可閃爍">
<longdesc>游標可否閃爍</longdesc>
</local_schema>
</entry>
<entry name="toolbar_icon_size">
<local_schema short_desc="工具列圖示大小">
<longdesc>指定工具列中的圖示大小</longdesc>
</local_schema>
</entry>
<entry name="toolbar_detachable">
<local_schema short_desc="工具列可卸離視窗">
<longdesc>用戶可否卸離及移動工具列</longdesc>
</local_schema>
</entry>
<entry name="menubar_detachable">
<local_schema short_desc="選單列可卸離視窗">
<longdesc>用戶可否卸離及移動選單列</longdesc>
</local_schema>
</entry>
<entry name="menus_have_icons">
<local_schema short_desc="選單可出現圖示">
<longdesc>選單項目旁邊應否顯示圖示</longdesc>
</local_schema>
</entry>
<entry name="toolbar_style">
<local_schema short_desc="工具列樣式">
<longdesc>工具列樣式。有效的值為“both”、“both_horiz”、“icon”及“text”</longdesc>
</local_schema>
</entry>
<entry name="can_change_accels">
<local_schema short_desc="可更改捷徑鍵">
<longdesc>當位置在使用中選單項目上時使用者能否在中隨時設定捷徑鍵</longdesc>
</local_schema>
</entry>
<entry name="menus_have_tearoff">
<local_schema short_desc="顯示可將選單卸離選單列的元件">
<longdesc>應否顯示可讓選單卸離選單列的元件</longdesc>
</local_schema>
</entry>
<entry name="enable_animations">
<local_schema short_desc="啟用動畫">
<longdesc>應否平滑地移動桌面的各種視窗元件。請注意：這是整體的設定，它會更改視窗總管、面板等等的運作方式。</longdesc>
</local_schema>
</entry>
<entry name="accessibility">
<local_schema short_desc="啟用無障礙環境">
<longdesc>程式應否支援無障礙環境</longdesc>
</local_schema>
</entry>
</dir>
<dir name="file-views">
<entry name="icon_theme">
<local_schema short_desc="檔案圖示主題">
<longdesc>顯示檔案圖示所使用的圖示主題</longdesc>
</local_schema>
</entry>
</dir>
<dir name="background">
<entry name="color_shading_type">
<local_schema short_desc="背景顏色顯示方式">
<longdesc>繪畫背景顏色的方式。可使用的值為“horizontal-gradient”、“vertical-gradient”及“solid”</longdesc>
</local_schema>
</entry>
<entry name="secondary_color">
<local_schema short_desc="第二種顏色">
<longdesc>當繪畫漸層時選用的右邊或底部顏色，繪畫單色時不會使用本選項。</longdesc>
</local_schema>
</entry>
<entry name="primary_color">
<local_schema short_desc="第一種顏色">
<longdesc>指定當顯示漸層時左邊或頂部的顏色，或是顯示單色時使用的顏色。</longdesc>
</local_schema>
</entry>
<entry name="picture_opacity">
<local_schema short_desc="圖案透明度">
<longdesc>繪畫背景圖案時選用的透明度</longdesc>
</local_schema>
</entry>
<entry name="picture_filename">
<local_schema short_desc="圖案檔案名稱">
<longdesc>用作背景圖案的檔案</longdesc>
</local_schema>
</entry>
<entry name="picture_options">
<local_schema short_desc="圖案選項">
<longdesc>決定 wallpaper_filename 中指定的圖像如何顯示。可使用的值為：“none”、“wallpaperd”、“centered”、“scaled”、“stretched”。</longdesc>
</local_schema>
</entry>
<entry name="draw_background">
<local_schema short_desc="繪畫桌布">
<longdesc>顯示 GNOME 桌面的桌布</longdesc>
</local_schema>
</entry>
</dir>
<dir name="accessibility">
<dir name="startup">
<entry name="exec_ats">
<local_schema short_desc="進入桌面時啟動的輔助技術程式">
<longdesc>當登入 GNOME 桌面時，會啟動這些有輔助技術的程式</longdesc>
</local_schema>
</entry>
</dir>
<dir name="keyboard">
<entry name="stickykeys_modifier_beep">
<local_schema>
<longdesc>當按下 Ctrl、Shift、Alt 等特殊按鍵時發出聲響</longdesc>
</local_schema>
</entry>
<entry name="stickykeys_two_key_off">
<local_schema>
<longdesc>如果同時按下兩個鍵則停止功能。</longdesc>
</local_schema>
</entry>
<entry name="slowkeys_delay">
<local_schema short_desc="時間間隔下限（毫秒）">
<longdesc>除非按下某鍵持續超過 @delay 毫秒，否則作廢。</longdesc>
</local_schema>
</entry>
<entry name="mousekeys_init_delay">
<local_schema short_desc="開始前的延遲時間（毫秒）">
<longdesc>等待指定的毫秒數目後，滑鼠鍵才會生效</longdesc>
</local_schema>
</entry>
<entry name="mousekeys_accel_time">
<local_schema short_desc="加速所需的毫秒數目">
<longdesc>從靜止加速至最高速度需要多少毫秒</longdesc>
</local_schema>
</entry>
<entry name="mousekeys_max_speed">
<local_schema short_desc="像素（每秒）">
<longdesc>最高速度時每秒可移動多少像素</longdesc>
</local_schema>
</entry>
<entry name="bouncekeys_delay">
<local_schema short_desc="時間間隔下限（毫秒）">
<longdesc>若在 @delay 毫秒內多次按下同一按鍵，則第一次以後的按鍵作廢</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="applications">
<dir name="window_manager">
<entry name="workspace_names">
<local_schema short_desc="工作區名稱（不鼓勵再使用）">
<longdesc>一系列視窗總管預設使用的工作區名稱。這設定鍵自 GNOME 2.12 已不鼓勵再使用。</longdesc>
</local_schema>
</entry>
<entry name="number_of_workspaces">
<local_schema short_desc="工作區數目（不鼓勵再使用）">
<longdesc>視窗總管應開啟的工作區數目，這設定鍵自 GNOME 2.12 已不鼓勵再使用。</longdesc>
</local_schema>
</entry>
<entry name="current">
<local_schema short_desc="用戶首選的視窗總管（不鼓勵再使用）">
<longdesc>首選的視窗總管。這設定鍵自 GNOME 2.12 已不鼓勵再使用。</longdesc>
</local_schema>
</entry>
<entry name="default">
<local_schema short_desc="後備視窗總管（不鼓勵再使用）">
<longdesc>當找不到用戶首選的視窗總管時，執行這裡指定的後備視窗總管。這設定鍵自 GNOME 2.12 已不鼓勵再使用。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="help_viewer">
<entry name="accepts_urls">
<local_schema short_desc="瀏覽器可辨認 remote 協定">
<longdesc>預設的說明文件瀏覽器能否接受 URL</longdesc>
</local_schema>
</entry>
<entry name="needs_term">
<local_schema short_desc="說明文件瀏覽器需要終端機">
<longdesc>預設的說明文件瀏覽器是否需要終端機方可運行</longdesc>
</local_schema>
</entry>
<entry name="exec">
<local_schema short_desc="預設說明文件瀏覽器">
<longdesc>預設說明文件瀏覽器</longdesc>
</local_schema>
</entry>
</dir>
<dir name="browser">
<entry name="nremote">
<local_schema short_desc="瀏覽器可辨認 remote 協定">
<longdesc>預設的瀏覽器可否辨認 netscape/mozilla remote 協定</longdesc>
</local_schema>
</entry>
<entry name="needs_term">
<local_schema short_desc="瀏覽器需要終端機方可運作">
<longdesc>預設的瀏覽器是否需要終端機方可運行</longdesc>
</local_schema>
</entry>
<entry name="exec">
<local_schema short_desc="預設瀏覽器">
<longdesc>所有 URL 的預設瀏覽器</longdesc>
</local_schema>
</entry>
</dir>
<dir name="component_viewer">
<entry name="exec">
<local_schema short_desc="預設的元件檢視程式">
<longdesc>有些檔案需要有一個元件來檢視它們，這裡指定檢視所用的程式。參數 %s 會被檔案的 URI 所取代，參數 %c 會被元件 IID 所取代。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="terminal">
<entry name="exec_arg">
<local_schema short_desc="預設終端機的 Exec 參數">
<longdesc>預設終端機所使用的 exec 參數。</longdesc>
</local_schema>
</entry>
<entry name="exec">
<local_schema short_desc="預設的終端機">
<longdesc>應用程式需要使用終端機時，預設執行的終端機。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
<dir name="url-handlers">
<dir name="h323">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“h323”URL 的處理程序">
<longdesc>若有啟用，用來處理“h323”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“h323”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“h323”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="callto">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“callto”URL 的處理程序">
<longdesc>若有啟用，用來處理“callto”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“callto”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“callto”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="aim">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="沒有處理“aim”URL 的處理程序">
<longdesc>若有啟用，用來處理“aim”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“aim”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“aim”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="mailto">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“mailto”URL 的處理程序">
<longdesc>若有啟用，用來處理“mailto”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“mailto”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“mailto”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="https">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“https”URL 的處理程序">
<longdesc>若有啟用，用來處理“https”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“https”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“https”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="http">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“http”URL 的處理程序">
<longdesc>若有啟用，用來處理“http”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“http”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“http”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="man">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“man”URL 的處理程序">
<longdesc>若有啟用，用來處理“man”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“man”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“man”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="info">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“info”URL 的處理程序">
<longdesc>若有啟用，用來處理“info”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“info”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“info”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="ghelp">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“ghelp”URL 的處理程序">
<longdesc>若有啟用，用來處理“ghelp”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“ghelp”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“ghelp”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="trash">
<entry name="needs_terminal">
<local_schema short_desc="在終端機中執行指令">
<longdesc>如設定為‘TRUE’，處理此 URL 的程式必須在終端機中執行。</longdesc>
</local_schema>
</entry>
<entry name="command">
<local_schema short_desc="處理“trash”URL 的處理程序">
<longdesc>若有啟用，用來處理“trash”URL 的指令。</longdesc>
</local_schema>
</entry>
<entry name="enabled">
<local_schema short_desc="指定的指令應否處理“trash”URL">
<longdesc>如設定為“TRUE”，在「指令」欄中的指令為處理“trash”URL 的程式。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
</dir>
</dir>
<dir name="system">
<dir name="smb">
<entry name="workgroup">
<local_schema short_desc="SMB 群組">
<longdesc>使用者所屬的 Windows 網路群組或網域。新的群組可能要等使用者再登入後才能完全生效，</longdesc>
</local_schema>
</entry>
</dir>
<dir name="dns_sd">
<entry name="extra_domains">
<local_schema short_desc="找尋 DNS-SD 服務的額外網域">
<longdesc>在“network:///”位置中顯示的 DNS-SD 網域清單，以逗號隔開。</longdesc>
</local_schema>
</entry>
<entry name="display_local">
<local_schema short_desc="如何顯示本地端的 DNS-SD 服務">
<longdesc>可能值為“merged”,“separate”以及“disabled”。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="proxy">
<entry name="autoconfig_url">
<local_schema short_desc="代表自動代理伺服器設定的 URL">
<longdesc>提供代理伺服器設置值的 URL</longdesc>
</local_schema>
</entry>
<entry name="socks_port">
<local_schema short_desc="SOCKS 代理伺服器埠號">
<longdesc>在“/system/proxy/socks_host’中定義的代理伺服器的埠號。</longdesc>
</local_schema>
</entry>
<entry name="socks_host">
<local_schema short_desc="SOCKS 代理伺服器主機名稱">
<longdesc>socks 代理伺服器主機名稱。</longdesc>
</local_schema>
</entry>
<entry name="ftp_port">
<local_schema short_desc="FTP 代理伺服器埠號">
<longdesc>在“/system/proxy/ftp_host’中定義的代理伺服器的埠號。</longdesc>
</local_schema>
</entry>
<entry name="ftp_host">
<local_schema short_desc="FTP 代理伺服器主機名稱">
<longdesc>FTP 代理伺服器主機名稱。</longdesc>
</local_schema>
</entry>
<entry name="secure_port">
<local_schema short_desc="安全 HTTP 代理伺服器埠號">
<longdesc>在“/system/proxy/secure_host’中定義的代理伺服器的埠號。</longdesc>
</local_schema>
</entry>
<entry name="secure_host">
<local_schema short_desc="安全 HTTP 代理伺服器主機名稱">
<longdesc>安全 HTTP 代理伺服器主機名稱。</longdesc>
</local_schema>
</entry>
<entry name="mode">
<local_schema short_desc="代理伺服器設置模式">
<longdesc>選擇代理伺服器設置模式。支援的值有“none”、“manual”、“auto”。</longdesc>
</local_schema>
</entry>
</dir>
<dir name="http_proxy">
<entry name="ignore_hosts">
<local_schema short_desc="不使用代理伺服器的主機">
<longdesc>這設定鍵中包含了不是通過代理伺服器（如果它有啟用），而是使用直接連線的主機清單。設定值可以是主機名稱，網域名稱（使用萬用字元如 *.foo.com），主機 IP 地址（IPv4 及 IPV6 亦可）和包括網路遮罩的網路地址（如 192.168.0.0/24）。</longdesc>
</local_schema>
</entry>
<entry name="authentication_password">
<local_schema short_desc="HTTP 代理伺服器密碼">
<longdesc>當進行 HTTP 代理時進行認證的密碼。</longdesc>
</local_schema>
</entry>
<entry name="authentication_user">
<local_schema short_desc="HTTP 代理伺服器使用者名稱">
<longdesc>當進行 HTTP 代理時通過認證的使用者名稱。</longdesc>
</local_schema>
</entry>
<entry name="use_authentication">
<local_schema short_desc="代理伺服器連線是否需要認證">
<longdesc>如設定為“true”，那麼連接到代理伺服器時需要認證。使用者/密碼的組合在
“/system/http_proxy/authentication_user”和“/system/http_proxy/authentication_password”中設定。</longdesc>
</local_schema>
</entry>
<entry name="port">
<local_schema short_desc="HTTP 代理伺服器埠號">
<longdesc>在“/system/http_proxy/host’中定義的代理伺服器的埠號。</longdesc>
</local_schema>
</entry>
<entry name="host">
<local_schema short_desc="HTTP 代理伺服器主機名稱">
<longdesc>HTTP 代理伺服器主機名稱。</longdesc>
</local_schema>
</entry>
<entry name="use_http_proxy">
<local_schema short_desc="使用 HTTP 代理伺服器">
<longdesc>經網際網路存取 HTTP 時啟用代理伺服器設定。</longdesc>
</local_schema>
</entry>
</dir>
</dir>
</dir>
</gconf>