File: //usr/share/doc/slrn-0.9.8.1pl1/Makefile
# Makefile.in generated by automake 1.8.3 from Makefile.am.
# doc/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
srcdir = .
top_srcdir = ..
pkgdatadir = $(datadir)/slrn
pkglibdir = $(libdir)/slrn
pkgincludedir = $(includedir)/slrn
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = x86_64-redhat-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in THANKS
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/autoconf/acinclude.m4 \
$(top_srcdir)/autoconf/gettext.m4 \
$(top_srcdir)/autoconf/iconv.m4 \
$(top_srcdir)/autoconf/lib-ld.m4 \
$(top_srcdir)/autoconf/lib-link.m4 \
$(top_srcdir)/autoconf/lib-prefix.m4 \
$(top_srcdir)/autoconf/progtest.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/autoconf/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"
NROFF = nroff
MANS = $(man_MANS)
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /builddir/build/BUILD/slrn-0.9.8.1pl1/autoconf/missing --run aclocal-1.8
AMDEP_FALSE = #
AMDEP_TRUE =
AMTAR = ${SHELL} /builddir/build/BUILD/slrn-0.9.8.1pl1/autoconf/missing --run tar
AUTOCONF = ${SHELL} /builddir/build/BUILD/slrn-0.9.8.1pl1/autoconf/missing --run autoconf
AUTOHEADER = ${SHELL} /builddir/build/BUILD/slrn-0.9.8.1pl1/autoconf/missing --run autoheader
AUTOMAKE = ${SHELL} /builddir/build/BUILD/slrn-0.9.8.1pl1/autoconf/missing --run automake-1.8
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic
CPP = gcc -E
CPPFLAGS = -I/usr/kerberos/include
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = grep -E
EXEEXT =
GMSGFMT = :
INEWS =
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
INTLLIBS =
LDFLAGS = -L/usr/kerberos/lib64
LIBICONV = -liconv
LIBINTL =
LIBOBJS =
LIBS = -lm -ldl
LOCALEDIR = /usr/share/locale
LOCKINC =
LOCKLIB =
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
MAKEINFO = ${SHELL} /builddir/build/BUILD/slrn-0.9.8.1pl1/autoconf/missing --run makeinfo
MAN_SLRNPULL = slrnpull.1
MKINSTALLDIRS = autoconf/mkinstalldirs
MSGFMT = :
MSGMERGE = :
OBJEXT = o
PACKAGE = slrn
PACKAGE_BUGREPORT =
PACKAGE_NAME =
PACKAGE_STRING =
PACKAGE_TARNAME =
PACKAGE_VERSION =
PATH_SEPARATOR = :
POSUB = po
SENDMAIL = /usr/sbin/sendmail
SET_MAKE =
SHELL = /bin/sh
SLANG_INC = -I/usr/include/slang
SLANG_INCLUDE = /usr/include/slang
SLANG_LIB = -L/usr/lib64
SLANG_LIB_DIR = /usr/lib64
SLRNPULL = slrnpull$(EXEEXT)
SSLINC =
SSLLIB = -L/usr/lib64 -lssl -lcrypto
STRIP =
TERMCAP =
USE_NLS = yes
UUINC =
UULIB =
VERSION = 0.9.8.1pl1
XGETTEXT = :
ac_ct_CC = gcc
ac_ct_STRIP =
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE =
am__include = include
am__leading_dot = .
am__quote =
bindir = /usr/bin
build = x86_64-redhat-linux-gnu
build_alias = x86_64-redhat-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = redhat
datadir = /usr/share
docdir = ${prefix}/share/doc/slrn
exec_prefix = /usr
host = x86_64-redhat-linux-gnu
host_alias = x86_64-redhat-linux-gnu
host_cpu = x86_64
host_os = linux-gnu
host_vendor = redhat
includedir = /usr/include
infodir = /usr/share/info
install_sh = /builddir/build/BUILD/slrn-0.9.8.1pl1/autoconf/install-sh
libdir = /usr/lib64
libexecdir = /usr/libexec
localstatedir = /var
mandir = /usr/share/man
mkdir_p = mkdir -p -- .
oldincludedir = /usr/include
prefix = /usr
program_transform_name = s,^,,
sbindir = /usr/sbin
sharedstatedir = /usr/com
slrn_libdir = /usr/lib/slrn
sysconfdir = /etc
target_alias = x86_64-redhat-linux-gnu
SUBDIRS = tm
PULLDOCS = slrnpull/README slrnpull/SETUP slrnpull/score \
slrnpull/setgid.txt slrnpull/slrn.rc slrnpull/slrnpull.conf \
slrnpull/slrnpull.sh slrnpull/README.offline
doc_DATA = FAQ FIRST_STEPS README.GroupLens README.SSL README.macros \
README.multiuser THANKS help.txt manual.txt score.sl score.txt \
slrn-doc.html slrn.rc slrnfuns.txt
man_MANS = slrn.1 slrnpull.1
EXTRA_DIST = $(doc_DATA) $(PULLDOCS) INSTALL.os2 INSTALL.unix INSTALL.vms \
INSTALL.w32 VMS-SLRN.HLP pc-keys.txt slrn.1 slrnpull.1
MOSTLYCLEANFILES = *~ slrnpull/*~
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
uninstall-info-am:
install-man1: $(man1_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
done
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
done
install-docDATA: $(doc_DATA)
@$(NORMAL_INSTALL)
test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
@list='$(doc_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
$(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
done
uninstall-docDATA:
@$(NORMAL_UNINSTALL)
@list='$(doc_DATA)'; for p in $$list; do \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
rm -f "$(DESTDIR)$(docdir)/$$f"; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if (etags --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
else \
include_option=--include; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(mkdir_p) $(distdir)/slrnpull
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| mkdir "$(distdir)/$$subdir" \
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="../$(top_distdir)" \
distdir="../$(distdir)/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile $(MANS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
distclean-generic:
-rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am: install-data-local install-docDATA install-man
install-exec-am:
install-info: install-info-recursive
install-man: install-man1
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-docDATA uninstall-info-am uninstall-local \
uninstall-man
uninstall-info: uninstall-info-recursive
uninstall-man: uninstall-man1
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
clean clean-generic clean-recursive ctags ctags-recursive \
distclean distclean-generic distclean-recursive distclean-tags \
distdir dvi dvi-am html html-am info info-am install \
install-am install-data install-data-am install-data-local \
install-docDATA install-exec install-exec-am install-info \
install-info-am install-man install-man1 install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic \
maintainer-clean-recursive mostlyclean mostlyclean-generic \
mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-docDATA uninstall-info-am \
uninstall-local uninstall-man uninstall-man1
install-data-local:
@if test "x$(SLRNPULL)" = "xslrnpull"; then \
$(mkinstalldirs) $(DESTDIR)$(docdir)/slrnpull; \
list='$(PULLDOCS)'; for p in $$list; do \
if test -f $$p; then \
echo " $(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p"; \
$(INSTALL_DATA) $$p $(DESTDIR)$(docdir)/$$p; \
fi; \
done; \
fi;
uninstall-local:
list='$(PULLDOCS)'; for p in $$list; do \
rm -f $(DESTDIR)$(docdir)/$$p; \
done
rmdir $(DESTDIR)$(docdir)/slrnpull || /bin/true
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: